In the injection molding industry, High Speed Five-Axis Servo Manipulator is mostly used. They can not only take products out of the mold, but also embed products in the mold, such as labeling, embedding metal, secondary molding, etc., and can also automatically package and automatically store after taking out. The whole factory production control system, the robot takes out the product in the mold, replaces the original semi-automatic production to fully automated production, and the molding raw material automatic feeding system, waste recycling system, etc. So what precautions should be taken in daily use of High Speed Five-Axis Servo Manipulator?
1. When the external power supply is abnormal, the control system will send a message to remind the operator of this situation. In order to enable the entire system to work safely, it is necessary to set up a safety circuit externally and add an additional protection route to ensure the safe operation of the machine.
2. Before installing, wiring, operating, and protecting the High Speed Five-Axis Servo Manipulator, you must first be familiar with the contents of the machine manual. When using it, it is also necessary to be familiar with the safety precautions of mechanical and electronic knowledge. When powered on, the mechanical and electronic fields are connected, and the working principles involved are also more complicated. Only when you know how to work can you master the correct method of using the High Speed Five-Axis Servo Manipulator and make correct handling of any emergency situations in a timely manner.
3. The High Speed Five-Axis Servo Manipulator should be installed on flame retardants such as metal, because the manipulator is an energized device. If it comes into contact with combustibles, it will produce a violent chemical reaction. Therefore, pay special attention to whether the installation environment is far away from combustibles to eliminate potential dangers.
4. It is necessary to ground when using it. The manipulator is a large machine and equipment, and the power consumption is far higher than that of ordinary electrical appliances. For the personal safety of users, grounding can avoid accidental injuries to the staff to the greatest extent.
5. The wiring work of the High Speed Five-Axis Servo Manipulator must be performed by a professional electrician. The wiring is relatively complicated and requires professional electronic knowledge to handle it. Safe wiring is more guaranteed. During operation, the staff should stand in a safe position and no one is allowed under the robot arm.
